How To Fix a Broken Nail

How To Fix a Broken Nail


Fix a Broken Nail, when your nails are broken next time, don’t worry. There are many tricks that you can use to repair the damage.


A broken nail is painful, but there’s no reason to affect your style, too! Never let a nail break an occasion again, How long the nail polish lasts.


how to fix a broken acrylic nail


1- Wash your hands or feet

Before you start repairing your nails, you’ll need to make sure your hands are clean and oil-free.

Use warm soapy water to wash your hands or feet, then dry them thoroughly with a clean towel.

Carefully wash and dry your hands to avoid nail tears and make things worse.


2- Cut a strip of repair material

If you have a nail repair kit, use a fibrous sheet of several tools by cutting a portion large enough to cover the nail and wrap it under its edge.

If you don’t have the nail repair kit, you can cut a piece of teabag cover material. This is the most popular alternative and also works fine.

If you don’t have repair paper or tea bags in your home, you can also try linen napkins or coffee filters.

The material used must be at least large to cover the entire parts. The material should preferably be large enough to cover the entire nail with excess.


3- Attach the repair items

Apply a small drop of glue or nail adhesive to your nail, then gently wrap the adhesive until it covers the entire nail. Use forceps to apply the material over the nail over the adhesive.


If you are using the repair kit, use the nail repair fluid in the kit instead of glue and apply it with the brush inside the kit.


Use the tweezers to stretch any creases or wrinkles under the material. The material should be as smooth as possible.


If necessary, use small nail clippers or regular scissors to cut off excess material.


4- Place the applied material over the top of the nail

Hold it with tweezers over the material on the top of the nail and fold it down over it until it sticks to the bottom of the nail.


If the material does not stick, you may need to add a small point of glue or repair fluid to make it stick to the lower side of the nail.


This procedure provides extra balance and protects the nail from breakage.


5- Place another layer of glue on the material used

Apply another drop of glue to the nail covering material and spread it with the brush. Try to create a smooth layer as possible.


You can use nail repair fluid instead of glue or nail adhesive.


6- Pen to nail the nail

If you have a polishing stone, polish the nail after the glue dries. Use the smoothing side first, then the shine side.


For better results, slide the polishing stone one way instead of sliding it back and forth.


7- Apply an upper layer over the entire nail

Apply a layer of nail hardener on the damaged nail for balance and a good protective layer.


It is best to let the adhesive dry overnight before doing this step to avoid bubbles or stains.


If you like, you can apply nail polish on the nail as soon as the top layer is dry.


8- Cut a piece of duct tape

Use scissors to cut a small piece of sticky tape larger than the size of the cut.


To make it easier to cut the tape without peeling it with scissors, use small nail clippers or sewing scissors.


If you use a pair of scissors, cut the tape using the edge of the blades.


Choose a one-sided tape with adhesive. Consider using magic tape, gift wrapping tape, multitasking tape, or another transparent office tape.


Avoid using strong strips like the power strip.


9- Cover the whole pieces with tape

Glue the center of the tape over the center of the fracture and then press it hard until it sticks, then using the edge of a healthy nail, put the rest of the tape on the sides until you cover the pieces from one end to the other end.


Make sure that both broken sides are completely lined up before applying the tape.


Use strength and pressure to hold the tape in place.


Pass the tape toward the cut, not the opposite.


Reverse scrolling can cause the nail to peel off faster.


how to fix a broken nail with superglue


10- Remove the separate nail

When the nail or part of it is completely separated from the nail bed, you may need to remove the nail to treat the injury.


Use the nail clipper carefully to cut any part partially and pull this separate nail using tweezers.


If you remove the nail, you will be able to deal with the nail film beneath it. As a result, you can reduce the injury by better repairing the area.


You can leave the separate nail in place and clean around it instead.


Doing this is difficult, but it is possible. The separate nail will fall by itself as soon as a new nail grows in place.


11- Stop the bleeding

Depending on the severity of the rupture, the nail bed may bleed a lot.


Before you can continue treatment, stop bleeding by applying pressure to an injury.


If possible, use medical gauze or sterile cotton.


Apply the cotton or screen directly to the injury, and press hard for a few minutes.


12- Cut the remaining nail away

Use sharp nail clippers to cut any rough or sharp edges.


You should do this some consideration whether you have removed or left the separate nail to prevent further cuts and tears.


Go to your doctor and make her trim your nails if it is too painful or if you are not comfortable doing it yourself.


13- Soak the affected foot or hand in cold water


Immediately after clipping the nails, soak the damaged nail in a bowl of cold water for 20 minutes.


The water should be cold enough to calm and numb the area.


Soaking your toe or toe in cold water helps to regulate blood flow in this area of ​​the body.


14- Cover the nail until a new nail grows

Wrap an adhesive pad on the damaged nail to prevent further tearing and reduce the risk of infection.

Keep the pad on the nail until a new nail grows.


Related Articles

Leave a Reply